How Much Does It Cost to Build a House in Ontario in 2026?

11/20/202610 min read

In 2026, building a house in Ontario costs about $350 to $575 per square foot for a mid-range custom home, before land, soft costs and HST. That puts a 2,000 sq ft custom home at roughly $700,000 to $1.15 million for construction alone. Builder-grade homes can come in lower, while luxury homes and tight Toronto infill lots can exceed $650 per square foot.

Your finish level is the biggest factor in that range. A builder-grade or basic home typically costs $300 to $375 per square foot, or about $600,000 to $750,000 for a 2,000 sq ft house. A mid-range custom home runs $375 to $500 per square foot, which works out to $750,000 to $1,000,000 for the same size. A high-end custom home costs $500 to $650 per square foot, or $1,000,000 to $1,300,000. At the top of the market, luxury homes and complex infill projects start at around $650 and can pass $1,000 per square foot, putting a 2,000 sq ft home at $1,300,000 to $2,000,000 or more. All of these figures cover construction only.

These bands reflect published 2026 Ontario estimates. Builders Ontario puts a mid-range custom build at roughly $375 to $500 per square foot for the structure alone, and Green Building Canada gives the same $375 to $500 range as a realistic mid-range estimate for a professionally built detached home.

On top of construction, budget for land, design, permits, development charges, servicing, landscaping, HST and a contingency. These can add 15% to 40% to the total.

Why per-square-foot numbers vary so much

Ask five builders how much it costs to build a house per square foot and you will hear five different numbers. That is because "per square foot" can mean very different things:

What's included. Some quotes include the basement, garage, permits and driveway. Others cover only the above-grade living space.

Production vs. custom. Altus Group's cost guide, which tracks production-style single-family homes with unfinished basements, shows Toronto at about $210 to $290 per square foot in its 2025 edition. A one-off custom home costs far more per foot because it has no economies of scale.

House size. A small house usually costs more per square foot than a large one, because the kitchen, bathrooms and mechanical systems cost about the same whatever the floor area.

Shape. A single-storey bungalow costs more per square foot than a two-storey home of the same size, because the foundation and roof are spread over less living space.

The best way to compare quotes is to ask each builder for a line-by-line breakdown of hard costs, soft costs, allowances and contingency. A design-build construction company can give you that breakdown early, because design and pricing happen in the same team.

Cost to build a house in Ontario by size

The estimates below are for construction only on a professionally built detached home, before land, soft costs and HST.

1,500 sq ft home. Expect about 525,000atbasicfinishes(350 per square foot), 675,000atmid-rangefinishes(450 per square foot) and 862,500athigh-endfinishes(575 per square foot).

2,000 sq ft home. Expect about $700,000 at basic finishes, $900,000 at mid-range finishes and $1,150,000 at high-end finishes.

2,500 sq ft home. Expect about $875,000 at basic finishes, $1,125,000 at mid-range finishes and $1,437,500 at high-end finishes.

3,000 sq ft home. Expect about $1,050,000 at basic finishes, $1,350,000 at mid-range finishes and $1,725,000 at high-end finishes.

Use these as planning figures, not quotes. Your actual cost depends on the lot, design, finishes and region.

Cost to build a house by region in Ontario

Mid-range custom construction costs differ noticeably across the province:

Toronto and the GTA (905). Expect about $420 to $575 or more per square foot. This region has the highest labour, lot and development charge costs, and infill lots add access and shoring costs.

Ottawa. Mid-range custom homes typically cost $350 to $475 per square foot. Ottawa has a strong trade market, and development charges vary by area.

Southwestern Ontario (London, Kitchener-Waterloo, Windsor). Costs usually run $340 to $475 per square foot. Land is cheaper than in the GTA, but trade availability varies from town to town.

Rural Ontario and cottage country. Construction often costs $300 to $450 per square foot. The per-foot cost is lower, but you need to add the cost of a well, septic system, hydro connection and long driveway.

Builders Ontario puts GTA and 905 custom builds at $420 to $575+ per square foot, while Green Building Canada reports Ottawa mid-range detached homes at $350 to $475 and notes rural builders quoting $300 to $350 for simpler homes. Rural figures often look lower only because site costs are listed separately.

Where the money goes: construction cost breakdown

For a typical mid-range custom home, the construction budget is usually split roughly like this:

Site work and foundation (10% to 15%). This covers excavation, footings, foundation walls, waterproofing and backfill.

Framing and structure (15% to 20%). This includes floor systems, walls, roof trusses, sheathing and beams.

Exterior envelope (12% to 18%). Roofing, windows, exterior doors, cladding and eavestroughs fall into this stage.

Mechanical, electrical and plumbing (15% to 20%). This covers HVAC, ductwork, wiring, the electrical panel, plumbing and the water heater.

Insulation and drywall (7% to 10%). This includes insulation, the air and vapour barrier, drywall and taping.

Interior finishes (25% to 35%). The largest share goes to the kitchen, bathrooms, flooring, trim, doors, paint and fixtures.

Interior finishes are the most flexible part of the budget. Two homes with the same structure can differ by $150,000 or more depending on cabinetry, countertops, tile and flooring choices. The foundation and site work stage is the least flexible, and it is where poor soil, rock or high groundwater can add unexpected cost. Arc Reno's site preparation and foundation construction crews assess these conditions before the quote is finalized.

Costs that are not in the per-square-foot price

This is where most first-time builders underestimate their budget. Here are the typical Ontario ranges:

Land. Land costs vary widely, and in the GTA land is often the largest single cost of the whole project.

Design and engineering. Architectural design usually costs $8,000 to $25,000 or more, with fully custom or complex designs at the higher end. Engineering (structural, soils and HVAC) adds another $5,000 to $20,000, and many lots require a soils report.

Permits and development charges. A building permit costs $3,000 to $25,000 or more, based on floor area and municipality. Development charges, set by the municipality, range from $20,000 to over $100,000. Toronto details are below.

Utility connections. Connecting to water, sewer, hydro and gas typically costs $5,000 to $30,000.

Rural servicing. Where there is no municipal sewer, a septic system costs $15,000 to $40,000. Where there is no municipal water, a well costs $10,000 to $25,000.

Driveway and landscaping. A driveway costs $10,000 to $40,000, with longer rural driveways costing more. Landscaping, including grading, sod, walkways and fencing, runs $20,000 to $100,000 or more.

Contingency. Set aside about 10% of the construction cost for hidden site conditions and changes.

Ranges for design through landscaping from Green Building Canada's 2026 Ontario cost guide.

Development charges in Toronto

Development charges pay for the roads, water, sewers and other infrastructure that new homes need, and they can be one of the largest fees on a new house. The City of Toronto's current development charge for a single or semi-detached home is $137,846. Under the 2026 Development Charges Reduction Program, funded by the federal and provincial governments, the City is cutting that rate by 60% to $55,138 for a period of about three years starting March 30, 2026. The federal government estimates this saves roughly $83,000 on a new single or semi-detached home in Toronto.

Other GTA municipalities set their own rates, so always confirm the current charge with your city or region before you budget. Rebuilding on a lot that already had a house can also reduce or eliminate development charges in many municipalities.

HST and new home rebates in 2026

New homes in Ontario are subject to 13% HST (5% federal and 8% provincial). On a $1 million build, that is $130,000, so the rebates available in 2026 make a big difference.

Ontario enhanced new housing rebate. According to the Canada Revenue Agency, eligible individuals can receive up to $80,000 in combined relief on the 8% provincial portion of the HST. It covers people who build a home themselves or hire a contractor to build it, as long as the home is their or a relative's primary residence.

Timing for owner-built and contract homes. For a home you build or have built on your own land, construction must start between April 1, 2026 and March 31, 2027, and the home must be substantially complete before 2030.

Value limits. The full rebate applies to homes valued up to $1 million, stays at $80,000 between $1 million and $1.5 million, phases out up to $1.85 million, and does not apply above that.

Federal first-time home buyers' GST rebate. First-time buyers can also receive up to $50,000 on the 5% federal portion for new homes up to $1 million, with partial relief up to $1.5 million.

Rebate rules are detailed and change often. Speak to an accountant before you sign a construction contract, and keep every invoice, because owner-built rebate claims depend on documented costs.

Sample budget: 2,500 sq ft custom home in Ontario

Here is what a realistic budget can look like for a mid-range, two-storey custom home on a serviced lot outside downtown Toronto. Your numbers will differ.

Construction is the largest line: 2,500 sq ft at $450 per square foot comes to $1,125,000. Design and engineering add about $35,000, and permits and development charges add another $60,000 to $150,000, depending on the municipality. Utility connections cost around $15,000, and the driveway and landscaping together come to about $50,000. A 10% contingency on construction adds $112,500.

That brings the total, before land and HST, to about $1.4 million to $1.5 million.

Land, financing costs, moving and furnishings are extra, and HST applies before any rebates.

What makes a house more expensive to build?

Complex design. Multiple rooflines, large spans, vaulted ceilings and walls of glass add engineering, steel and labour.

Basement finishing. A finished basement adds living space at a lower cost per foot than above-grade space, but still adds significantly to the total.

Lot conditions. Slopes, rock, poor soil, high groundwater and tight infill access all raise site costs.

Energy performance. Higher-performance walls, triple-glazed windows and heat pumps cost more up front but reduce operating costs. Green Building Canada estimates energy-efficiency upgrades can add 5% to 15% to the construction budget.

Finish selections. Custom cabinetry, natural stone, wide-plank hardwood and designer fixtures move a home from mid-range to high-end quickly.

Changes during construction. Change orders are the most avoidable cost overrun.

How to build a house for less in Ontario

Keep the shape simple. A rectangular two-storey footprint with a simple roof is the most cost-efficient design.

Build up, not out. Two storeys share one foundation and one roof.

Design within zoning. Avoiding a minor variance saves application fees, consultant time and months of carrying costs.

Make every selection before construction. Fixed selections allow accurate pricing and prevent change orders.

Spend on the envelope, save on finishes. Insulation and windows are hard to upgrade later; light fixtures and paint are easy.

Use a design-build team. One team for design, permits and construction means fewer redesigns and tighter pricing. Arc Reno's permit assistance helps keep the approval stage from adding carrying costs.

Time your start date. Starting construction within the 2026–2027 rebate window may reduce your HST, subject to eligibility.

Is it cheaper to build or buy a house in Ontario?

In most of Ontario, buying an existing home is cheaper and faster once you add land, development charges, soft costs, HST and financing during construction. Building makes more sense when you already own the land, are replacing an old house on a good lot, or want a layout, size or energy performance that the resale market does not offer.

A smaller alternative is a garden suite in the backyard of an existing home. It costs far less than a full new house and can provide space for family or rental income. Arc Reno designs and builds garden suites as part of its design-build services.

Cost to build a custom home vs. a production home

A production home uses standard plans, bulk purchasing and repeated construction sequences, which keeps the per-foot cost down. A custom home is designed for one lot and one family, so it carries more design time, more custom materials and more site supervision. Expect a custom home to cost noticeably more per square foot than a production home of similar size, in exchange for full control over layout, quality and energy performance.

You can see examples of what different budgets produce in our completed construction projects.

Frequently asked questions

How much does it cost to build a house in Ontario in 2026?

A mid-range custom home typically costs $350 to $575 per square foot for construction, or about $700,000 to $1.15 million for 2,000 sq ft. Land, soft costs, development charges and HST are extra.

How much per square foot to build a house in Ontario?

Builder-grade homes start around $300 to $375 per square foot, mid-range custom homes run $375 to $500, and high-end or luxury homes range from $500 to over $1,000. The GTA is generally at the higher end.

How much does it cost to build a 2,000 sq ft house in Ontario?

Roughly $700,000 to $1.15 million for construction alone at mid-range finishes. After design, permits, development charges, servicing and contingency, the total before land is often $850,000 to $1.4 million.

What is the cheapest way to build a house in Ontario?

A simple rectangular two-storey design, standard finishes, a serviced lot, no zoning variances and all selections made before construction. Rebuilding on a lot you already own also avoids land costs and can reduce development charges.

How much are development charges on a new house in Toronto?

The current rate for a single or semi-detached home is $137,846. Under the 2026 Development Charges Reduction Program, the City is reducing it by 60% to $55,138 for about three years starting March 30, 2026.

Do I pay HST when building a house in Ontario?

Yes, 13% HST applies to new homes. In 2026, the Ontario enhanced new housing rebate can return up to $80,000 of the provincial portion for eligible primary residences, including owner-built homes and homes built by a contractor on your land, if construction starts between April 1, 2026 and March 31, 2027.

Is it cheaper to build or buy in Ontario?

Usually buying is cheaper once land, fees and HST are included. Building is more competitive if you already own the land or are replacing an older home on a valuable lot.

Get an accurate estimate from Arc Reno

Per-square-foot figures are a starting point. The only way to know what your house will cost is a detailed estimate based on your lot, your design and your finishes. Arc Reno is a design-build construction company that handles design, permits, foundations, framing and finishing with one team, so your budget is set early and tracked through every phase.

Ready to price your build? Request a free construction estimate or call 289-544-5384.

Contact

Get in touch for your next project.

Email

Call

info@arcreno.ca

+1 289-544-5384

+1 437-929-2424

Tanuj.arora@arcreno.ca

Amandeep.singh@arcreno.ca